Expansion joints profiles

In order to take up horizontal and vertical movements in a structural and inconspicuous manner, expansion joint profiles are used in the area of the hollow floor, adapted to the application.

Electrical outlets

As all electrical installations are laid under the hollow floor, electrical connections can be placed exactly where you want them by the insallation of electrical outlets.

Air ventilation outlets

Air ventilation outlets allow the room to be air-conditioned and ventilated without creating draughts. Various systems are available: - Open system Ventilation takes place directly in the cavity for installations, which is designed as a pressure floor, through the corresponding air ventilation outlets or rather through the hexagonal ventilation outlets into the room. - Closed system In a closed system, the air is fed through a pipe system or through cavity barriers with fixed connections to the air ventilation outlets.

Revision openings

As a matter of course, hollow floors also have to guarantee easy access to the installations. For this purpose, FLOOR and more® can be equipped with revision openings. The removable floor panels are supported by a sturdy and surrounding frame which ensures the high stability of the floor construction. The covering separation rails and rubber seal lips can be visually adjusted to the chosen floor covering - so the revision opening blends into the floor surface inconspicuously.

Bridging profiles

Due to structural reasons bridging is required where pedestals cannot be installed. In such cases, special bridging profiles are available which are easy to install and improve at the same time dynamic and static load-bearing capacities.

Reinforcement profiles

Standard Lindner floor systems already exhibit high load-bearing capacities. Should these still not be sufficient, the system can be upgraded by reinforcement profiles. Various options are possible, from the lightest stringer which increases lateral rigidity through to a C-profile.