Efficient Heating and Cooling

NORIT underfloor heating and cooling systems are integrated directly into the floor and distribute heat evenly throughout the room. However, underfloor heating does not only provide thermal comfort with gentle heat radiation in winter: In summer, the underfloor heating can also cool. The heating systems can be combined with alternative energy sources such as solar systems and heat pumps. Lindner GFT underfloor heating systems are therefore the ideal solution for energy-efficient renovations, refurbishments and new buildings.

schnelle sichere Verlegung der NORIT-Heizrohre in der fix-Führung
Klick- oder Nut-Federsystem: Kein Verschrauben und nachträgliches Spachteln nötig
Hoch fließfähige Vergussmasse mit flowtherm Rezeptur
schneller Baufortschritt, belegreif für Oberbeläge ab 24 Stunden
Heizen und Kühlen in einem System
niedrige Aufbauhöhe ab 23 mm

Advantages of Underfloor Heating

Radiators or underfloor heating? Our NORIT underfloor heating system offers you several advantages:

Efficient heating: Thanks to low flow temperatures, underfloor heating reduces heating costs without compromising comfort.
Create an atmosphere of well-being: Lindner GFT underfloor heating systems create a high level of thermal comfort with gentle radiant heat.
For a good indoor climate: The high proportion of radiation from underfloor heating raises very little dust – this is particularly beneficial for asthmatics and people with dust allergies.
Invisible heating and cooling: Hidden in the floor, underfloor heating and cooling systems provide architectural freedom in interiors. Annoying radiators? Not a chance!
Countless design options: Carpet, tile or parquet – underfloor heating can be easily combined with a wide range of flooring to suit your style.

How do I Install Underfloor Heating?

Do you want to install your underfloor heating yourself? Here is a quick guide on the main steps on how to install underfloor heating:

Preparing the first element: Saw off the protruding tongues of the first panel and the first row.
First row of panels: Start laying in the left corner of the room and do not press the edge insulation strip together. Cut the last board in the row to the correct length and insert it.
Start a new row: Start with the remaining board in the trailing joint. Then insert the tongue into the groove of the board that has already been laid. Lay the board down and close the tongue and groove joint at the front with a laying block. The surface must be free of dust and dirt to prepare for the following steps.
Apply primer: The reddish primer is applied evenly with a pressure sprayer. To ensure that the sides of the cut-outs are completely primed, it is recommended to spray crosswise from several directions.
Laying the pipe: The heating pipe is laid as specified by the installer. Ensure that the pipe fits snugly into the guide; it must not be twisted or bent.
Grout the surface: Before grouting, check that the heating pipe is correctly positioned in the guide. The use of a notched trowel is recommended to maintain the minimum 3mm overlap above the elements.
Prepare the floor covering: The floor covering can now be laid.

Don't hesitate to contact us!

References

All from a single source

Once around the globe and back again to our home Arnstorf: With our construction projects we are represented almost everywhere! No matter whether new construction or renovation, whether interior fit-out, building envelope or insulation – our references consist of a colourful mixture full of new challenges and impressive results.